Setting For Computer

Setting up a computer

You have a new computer and are ready to set it up. While this may seem like an overwhelming and difficult task, it is actually quite simple. It doesn't matter what brand of computer you have because most computers are set up in a similar way.

If you're setting up a newly purchased computer that's still in the box, you'll probably find a how-to guide in the packaging that includes step-by-step details. However, even if it didn't include instructions you can still set up the computer in a few easy steps. In this lesson, we'll go through the different steps needed to set up a typical computer.

Watch the video to learn how to set up a desktop computer.

Setting up a laptop computer

If you have a laptop, setup should be easy: Just open it and press the power button. If the battery isn't charged, you'll need to plug in the AC adapter. You can continue using the laptop while it charges.

If your laptop has any peripherals, like external speakers, you may want to read the instructions below because laptops and desktops generally use the same types of connections.

Setting up a desktop computer

Step 1

Unpack the monitor and computer case from the box. Remove any plastic covering or protective tape. Place the monitor and computer case where you want on a desk or work area.

Think about where you want your desk or work area to be located, and where you want your monitor, computer case, and other hardware to be. Be sure to place your computer case in an area that is well ventilated and that has good air flow. This will help to prevent overheating.

Step 2

Locate the monitor cable. There are several types of monitor cables, so the one on your computer may not look like the one in the image at the left. If you're having trouble finding your monitor cable, refer to the instruction manual for your computer. (If you have an all-in-one computer that's built into the monitor, you can skip to Step 4).

Step 3

Connect one end of the cable to the monitor port on the back of thecomputer case and the other end to the monitor. Hand tighten the plastic-covered screws on the monitor cable to secure it.

Step 4

Unpack the keyboard and determine whether it uses a USB(rectangular) connector or a PS/2 (round) connector. If it uses a USB connector, plug it into any of the USB ports on the back of the computer. If it uses a PS/2 connector, plug it into the purple keyboard port on the back of the computer.

Step 5

Unpack the mouse and determine whether it uses a USB (rectangular) connector or a PS/2 (round) connector. If it uses a USB connector, plug it into any of the USB ports on the back of the computer. If it uses a PS/2 connector, plug it into the green mouse port on the back of the computer.

If your keyboard has a USB port, you can connect your mouse to the keyboard instead of connecting it directly to your computer.

If you have a wireless mouse or keyboard, you may need to connect a Bluetooth dongle (USB adapter) to your computer. However, many computers have built-in Bluetooth, so a dongle may not be necessary.

Step 6

If you have external speakers or headphones, you can connect them to your computer's audio port (either on the front or the back of the computer case). Many computers have color-coded ports. Speakers orheadphones connect to the green port, and a microphone connects to the pink port. The blue port is the line in, which can be used with other types of devices.

Some speakers, headphones, and microphones have USB connectorsinstead of the usual audio plug. These can be connected to any USB port. In addition, many computers have speakers or microphones built into the monitor.

Step 7

Locate the two power supply cables that came with your computer. Plug the first power supply cable into the back of the computer case, and then into a surge protector. Then, using the other cable, connect the monitor to the surge protector.

Step 8

Finally, plug the surge protector into a wall outlet. You may also need to turn on the surge protector if it has a power switch.

Setup complete

Your basic computer hardware is now set up. Before you start it up, spend some time arranging your workspace. A workspace that is arranged well can improve your productivity and promote health.

how to computer

computer tips

setting for computer

SHARE

Milan Tomic

Hi. I’m Designer of Blog Magic. I’m CEO/Founder of ThemeXpose. I’m Creative Art Director, Web Designer, UI/UX Designer, Interaction Designer, Industrial Designer, Web Developer, Business Enthusiast, StartUp Enthusiast, Speaker, Writer and Photographer. Inspired to make things looks better.

• 
• 
• 
• 
•